| Product Number | FX-301-P |
| Part Number | UFX301P |
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Power consumption |
Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 430 mW or less (Current consumption 18 mA or less at 24 V supply voltage) |
| Output |
PNP open-collector transistor
• Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade.)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) source current.] |
Output operation
Short-circuit protection | Selectable either Light-ON or Dark-ON, with jog switch
Incorporated |
| Response time | 65 μs or less [H-SP (Red LED type only)], 150 μs or less (FAST),
250 μs or less [STD / S-D (Red LED type only)],
2 ms or less (LONG), selectable with jog switch |
| Sensitivity setting | 2-point teaching / Limit teaching / Manual adjustment / Full-auto teaching / Max. sensitivity teaching |
| Operation indicator | Orange LED (lights up when the output is ON) |
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
| MODE indicator | RUN: Green LED, TEACH • ADJ • L/D ON • TIMER • PRO: Yellow LED |
| Digital display | 4 digit red LED display |
Fine sensitivity
adjustment function | Incorporated |
| Timer function | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
[Timer period: Red LED type; 0.5 ms approx., 1 to 9,999 ms
(Blue LED, Green LED, Infrared LED type; approx. 0.5 to 500 ms)] |
Light emitting amount
selection function | Incorporated (Red LED type only) (Note 3)
FAST, STD, LONG: 4 level, H-SP: 3 level, S-D: 2 level |
Automatic interference
prevention function | ncorporated (Up to four sets of fiber heads can be mounted close together. However, 2 fiber heads in H-SP mode.) (Note 4) |
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,000 ℓx at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 6) |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 6) |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, MODE key: Acrylic, Jog switch: Heat-resistant ABS (FX-301B/G/H: Acrylic) |
| Connecting method | Connector (Note 7) |
| Cable length | Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable. |
| Weight | Net weight: 20 g approx., Gross weight: 25 g approx. |
| Made In | China |
| Made In | China |
| Directive Compliance | EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Made In | Japan |
| Type of display | LED |
| Ambient temperature, operation | -40 ... 60 °C |
| Ambient temperature, storage | -40 ... 70 °C |
| Degree of protection | IP 67 |
| IP 69K | Sensitivity adjustment |
| Protection class | III |
| Certifications | c UL US |
| Standards applied | IEC 60947-5-2 |
| Made in | Malasiya |
| Protection class | III |
| Certifications | c UL US |
| Standards applied | IEC 60947-5-2 |
| Made in | China |
Pepperl+Fuchs NJ8-18GM50-E2 Proximity Sensor
1 × ₹3,850.00 
Pepperl+Fuchs NJ8-18GM50-E2 Proximity Sensor 
Reviews
There are no reviews yet