| Product Number | FX-412G |
| Part Number | UFX412G |
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Supply Voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Power Consumption | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 580 mW or less (Current consumption 24 mA or less at 24 V supply voltage) |
| Output | NPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| Output: Output Operation | Switchable either Light-ON or Dark-ON |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 150 μs or less (FAST), 500 μs or less (STD), 4.5 ms or less (U-LG) selectable with setting switch |
| Operation Indicator | Orange LED (lights up when the output is ON) |
| Stability Indicator | Green LED (lights up under stable light received condition or stable dark condition) |
| Timer Function | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
[Timer period (Note): 1 ms to 3 sec. approx. (1 to 10 ms: Setting possible in units of 1 ms, 10 to 100 ms: Setting possible in units of 10 ms, 100 to 500 ms: Setting possible in units of 50 ms, 500 ms to 1 sec.: Setting possible in units of 100 ms, 1 to 3 sec.: Setting possible in units of 500 ms)]
(Note):For models manufactured up until June 2005, the timer period is approx. 1 to 500 ms. |
| Automatic Interference Prevention Function | Incorporated (Up to four sets of fiber heads can be mounted close together. However, U-LG mode is 8 fiber heads.)
(Note:When the power supply is switched on, the light emission timing is automatically set for interference prevention.) |
| Ambient Temperature | –10 to +55 ℃ –14 to +131 ℉
(If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉,
if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.) |
| Insulation Resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.) |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Emitting Element (Modulated) | Green LED |
| Emitting Element (Modulated): Peak Emission Wavelength | 525 nm 0.021 mil |
| Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| Cable Length | Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable. |
| Weight (Typ.) | Net weight: 20 g approx., Gross weight: 30 g approx. |
| Made In | Japan |
Reviews
There are no reviews yet