The AUO A070FW03-V.8 LCD Module is a 7.0″ a-Si TFT-LCD panel. It is a high-performance display solution, perfect for various industrial and multimedia applications. Featuring a 480×234 resolution and a pixel density of 76 PPI, this display panel provides clear visuals on a larger screen, with an active area measuring 154.08 mm by 86.58 mm. With a typical brightness of 300 cd/m², it ensures good visibility in moderately lit environments, while its contrast ratio of 400:1 enhances color separation and image quality.

The panel’s viewing angles are rated at 65 degrees left, right, and bottom, with a narrower top viewing angle of 40 degrees, ensuring good image consistency from most directions. Its response time of 12 ms (Tr) and 18 ms (Td) offers smooth transitions for standard multimedia applications. Built with TN technology, this display operates in a normally white, transmissive mode with a vertical RGB stripe layout for vibrant color reproduction.

The AUO A070FW03-V.8 LCD Module supports full-color output and interfaces via TFT-specific analog RGB through a 26-pin FPC, making it suitable for a range of applications that require analog input. The power supply requirements are versatile, with typical voltages at 3.3/5.0V (VCC) and additional voltages of 5V (AVDD), 15V (VGH), and -10V (VGL). Equipped with a single CCFL backlight rated for 10,000 hours, the panel is long-lasting and lightweight, weighing approximately 147g. Its robust design allows it to operate in temperatures between -10°C to 60°C, making it suitable for various environmental conditions.

• It is a front polarizer. It may damaged. Please be cautious. Don’t scratch it.
• Always turn off the power supply when you are inserting or disconnecting it from the input connector.
• Wipe off water drop immediately as it may cause discoloration or spots.
• Please handle with great care. It may broken or cracked if dropped or bumped on hard surface.
• Do not try to open or modify the module assembly.
• At the insertion or removal of the Signal Interface Connector do not rotate or tilt the Interface Connector of the TFT Module. It may damage the panel.
• Severe temperature condition may  result in different luminance, response time.